- Authorired Channel Partner of Lauritz Knudsen, INOVANCE & HITACHI
Khushi Control Systems is a leading supplier of MCC products
A Motor Control Center (MCC) is an assembly that controls several or all-electric motors centrally. There are multiple enclosed sections and a common power bus. Each section has a combination starter, which consists of a motor starter, fuses or circuit breakers, and a power disconnect. It is also possible to equip a motor control center with push buttons, indicator lights, variable-frequency drives, programmable logic controllers, and metering equipment. In some buildings, it may be combined with the electrical service entrance.
Typically, Motor Control Centers can be found in large industrial or commercial buildings containing a lot of electrical motors that must be controlled centrally, such as an electrical room or mechanical room.
Khushi Control Systems is a leading supplier of PCC products
A Power Control Centre (PCC) is a main power control panel that contains feeder breakers and supply breakers, monitoring devices, control devices, switching devices, protection devices, and instrumentation devices. Alternatively, it is called the Main Switchboard. This type of switch is mainly installed near power sources, so its fault level is high. To function properly, it must be able to satisfy 50KA or 65KA fault levels for 1 second.
A Power Control Center’s bus bar system is designed to handle fault levels and temperature rises to 40 degrees Celsius. The termination of cables is provided with ample space. To protect the source and equipment, various protections are provided, such as short circuits, overloads, earth faults, under voltages, etc.
A leading supplier of MCC and PCC panels.
Many industrial processes require a large number of motors, so Motor Control Centre (MCC) panels are used to regulate them all. With the Motor control Center, the control components can be plugged in or unplugged, eliminating the need for wiring. A motor control center would consist of a bus bar and other control equipment to control the motor’s operation and integrate the components into a panel.
A Power Control Center panel monitors and controls the voltage and power of a power system. In addition to being made of high-quality raw material, these panels are extremely sturdy in construction. The main power instrument panel consists of feeder breakers, provide breakers, monitoring devices, and control devices. A reputable Power Control Center panel manufacturer reads all field data received for electrical power panels.
| Operational Current | Upto 6300A |
| Ambient Temperature | Max 50-60 ℃ |
| Short Circuit Withstand Capacity | 50-100KA for 1Sec |
| Protection class | IP 20/ IP 44 / IP 65 |
| Type | Fixed & Semi draw out type with single or double front design |
| Communication | Modbus Protocol, RS485 |
| Standard Paint Shades | RAL-7035, RAL-7032 and 631 as per IS:5 Structure Finish Powder Coating. |
| Panel height | up to 2500mm (including 100mm High Plinth/Base). |
| Panel Width | 900mm Withdrawable execution & Fixed Execution depends on the application. |
| Techno Modular Design | with flexibility in construction / fully bolted with concealed hinges for all doors. |
| Tank coating. | 10 Tank spray-based tri-cationic phosphating treatment and electrostatic with epoxy-based powder |
Khushi Control System Automation Products is a leading manufacturer, distributor, supplier, and service provider of advanced AC drives and Variable Frequency Drives (VFD).
